LC低通滤波器计算器

Butterworth Pi LC Low Pass Filter Calculator

Enter your values:
Cutoff Frequency:
Impedance Z0:
Number of Components: (1-11)
Results:
Inductance: Capacitance:
Unit : Unit :
L1: C1:
L2: C2:
L3: C3:
L4: C4:
L5: C5:
C6:
A PI filter is a filter that has a series element and two parallel elements connected in the shape of the Greek letter PI.

Butterworth filter are characterized by a constant gain (flat response) across the midband of the circuit and a 20 dB per decade roll-off rate for each pole contained in the circuit.
Butterworth filters are termed maximally flat magnitude response filters, optimized for gain flatness in the pass band. The attenuation is -3db at cutoff frequency. Above the cutoff frequency the attenuation is -20 db.
The Butterworth is the only filter that maintains same shape for higher orders whereas other varieties of filters (Bessel, Chebyshev, elliptic) have different shapes at higher orders.
A Low pass filter is a filter that passes low-frequency signals but attenuates signals with frequencies higher than the cutoff frequency.

LC低通滤波器计算器公式与使用说明

计算依据:fc=1/(2πRC);f0=1/(2π√(LC));Q=f0/BW。

输入:截止/中心频率(Hz)、电阻R(kΩ)、电感L(mH)、带宽BW(Hz);输出:LC低通滤波器计算器计算结果、R/L/C值、传递函数、增益和关键频点。

公式依据与参考资料

公式口径参考:www.analog.com。实际器件参数请同时核对数据手册。

常见问题

LC低通滤波器计算器如何使用?

按页面字段输入截止/中心频率(Hz)、电阻R(kΩ)、电感L(mH)、带宽BW(Hz),执行计算后核对LC低通滤波器计算器计算结果、R/L/C值、传递函数、增益和关键频点。

LC低通滤波器计算器采用什么公式?

本页依据fc=1/(2πRC);f0=1/(2π√(LC));Q=f0/BW计算,并按页面标注的工程单位换算。

计算结果适合什么场景?

结果适合学习、方案估算和交叉复核;器件选型还应结合数据手册、制造公差、温漂和安全裕量。

查看滤波器、振荡器与波形全部计算器 · 查看电子电路445个独立计算器页面